Steel In-forced HDPE Pipe For Drinking Water

Steel In-forced HDPE Pipe For Drinking Water

Packaging Details Paking Size (m) :0.3*0.16*4=0.192 cbm Each tube is 4 meters long ,inner is wrapped separately with plastic bag, Pipe fittings are packed in cartons.size:0.9*0.45*0.3=0.122cbm,clear plastic bag + carton outside package on pallets + wrapping film Delivery Time 5-20days after deposit confirmed

Send InquiryChat Now

Product Details

Packaging & Delivery

Packaging Details

Paking Size (m) :0.3*0.16*4=0.192 cbm 

Each tube is 4 meters long ,inner is wrapped separately with plastic bag, 

Pipe fittings are packed in cartons.size:0.9*0.45*0.3=0.122cbm,clear plastic bag + carton outside package on pallets + wrapping film

Delivery Time

5-20days after deposit confirmed


Resistance to Rapid Crack Propagation(RCP) and Resistance to Environment Stress Crack(ESCR)>>>

Because of the existence of the steel mesh skeleton in the steel mesh reinforced PE pipe,

The product properties of withstanding loop pressure and the ESCR are increased a lot. According to the IOS13477(test S4),the BECETEL(Belgian Research Centre for Pipe&Fittings) had evaluated the performance of the resistance to rapid crack propagation of the product,and the results show that the RCP resistance of the steel mes reinforced PE pipe is excellent,and much higher than that of PE pipe.


Super Resistance to Impact and Dimension Stability>>>
 

The elasticity modulus of the steel is about 200 times,higher than that of the PE pipe.Reinforced by the steel mess skeleton,the rigidity and the property of resistance to impact and the dimension stability of the product are far beyond than any kind of plastic pipes.At the same time,the characters of the steel mesh skeleton configuration make the product preserve reasonable flexibility in the axial direction,so the pipes posses both rigidity and flexibility,and it can be transported and installed easily, in addition to that,the pipelines can resist to vertical load created by soil movement or traffic,and it also has excellent characters both for economy and safety when operation of the line.

 

Good traceability>>>

Because of steel mesh inside of the pipe,the steel mesh reinforced PE pipe possesses the good traceability.No additional tracing and protecting mark to be needed.The pipe can be detected by magnetic detectors easily.thus it is very convenient for the pipeline to be repaired or maintained.


Specification>>>


Dia wall
 thickness
 steel reinforced HDPE
 pipe for industry
 steel reinforced HDPE
 pipe for water


nominal pressure TEMP nominal pressure TEMP
DN50 11 1.0  1.6  2.0  2.5  1.0  degree 1.0  1.6  2.0  2.5  1.0  degree
DN65 11



—20-70



—20-80
DN80 12







DN100 12





DN125 12





DN150 12
DN200 12.5


DN250 12.5

DN300 12.5



DN400 15



DN350 15



DN400 15



DN450 16



DN500 16



DN600 20







Correction factor for nominal pressure at different temperature


steel reinforced HDPE pipe for waterTEMP℃0<t≤2020<t≤3030<t≤4040<t≤5050<t≤6060<t≤7070<t≤80
correction factor10.950.90.860.810.760.6
steel reinforced HDPE pipe for waterTEMP℃0<t≤2020<t≤3030<t≤4040<t≤5050<t≤6060<t≤70
correction factor10.950.90.860.810.76

Maximum Bending Radius

Nominal inner dia(d.mm) 50 65 80 125 150 200 250 300 350 400 450 500 600
MAX.bending radius(r.mm) 80D 80D 80D 80D 80D 100D 100D 100D 110D 110D 110D 110D 110D

Distance Between Brackets

spec(mm) 50,65 800,100 125,150 200,250 300,350,400,450,500 600
support space(M) 2.5 3 3.5 4 5 6

Thermal Conductivity of the Pipe

Name  (W/MK)
steel reinforced HDPE pipe  0.43
steel pipe 50-60.5

Fittings>>>

Steel Reinforced HDPE Pipe3.jpg

Steel Reinforced HDPE Pipe4.jpg

Steel Reinforced HDPE Pipe5.jpg

Steel Reinforced HDPE Pipe6.jpg

Certifications>>>

证书.jpg


FAQ>>>

Q1. Are you trading company or manufacturer ?
A: We are professional manufacturer and welcome to your visit at any time.

 

Q2. How long is your delivery time?
A: Generally it takes 3-7 days if the goods are in stock,which is depends on your quantity and can be negotiable.

 

Q3. Do you provide samples ?
A: Yes,of course sample is avaliable and for small quantity we can supply for free.

 

Q4.What is your terms of payment ?
A: L/C,Western Union,T/T30%  in advance ,balance before shippment and so on.

 

 

Q5.Can I have my own Logo on the product?
A: Yes, sure,you just send us your drawing,we'll make logo for you and before production we will confirm with you in advance.

 

Q6.Can I request to change the method of packaging and transportation?
A: Yes, the packaging and transportation can be made as per your requirements.

Inquiry